Product ID:10W40 TEC II TURBO MOTOR OIL
MSDS Date:01/14/1988
FSC:9150
NIIN:00-116-0506
MSDS Number: BKHDW

DRYDEN OIL COMPANY

9300 PULASKI HWY
BALTIMORE, MD 21220

Emergency Phone: (301) 574-5000

Info Phone: (301) 574-5000

Cage: 40310

WARD'S AUTO PARTS, INC.

BALTIMORE, MD 21220 US

Telephone: 301-574-5000

Cage: WARDS

SOLVENT REFINED HYDROTREATED HEAVY PARAFFINIC DISTILLATE,

CAS: 64742-54-7

RTECS: PY8035500

Fraction By Weight: <80%

OSHA PEL 5 MG/CUM (MIST)

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY

CAS: 64741-88-4

RTECS: PY8040500

Fraction By Weight: <80%

OSHA PEL 5 MG/CUM

ACGIH TLV: 5 MG/CUM

PROPRIETARY ADDITIVES

Fraction By Weight: <20%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INGESTION:
RELATIVELY NON-TOXIC. INHALATION: IRRITATION IF OVERCOME BY VAPOR
FROM HOT PRODUCT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITATION. INGESTION: RELATIVELY
NON-TOXIC. INHALATION: IRRITATION IF OVERCOME BY VAPOR FROM HOT
PRODUCT.

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE CPR OR
OXYGEN IF NEEDED. IF OVER-EXPOSED TO OIL MIST, REMOVE FROM FURTHER
EXPOSURE UNTIL EXCESSIVE MIST OIL CONDITION SUBSIDES. INGESTION:
DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:COC
Flash Point:390-433F
Lower Limits: 0.9%
Upper Limits: 7%
Extinguishing Media:FOAM, WATER SPRAY (FOG), DRY CHEMICAL, CO2,
VAPORIZING LIQUID TYPE EXTINGUISHING AGENTS.
Fire Fighting Procedures:USE WATER SPRAY, DRY CHEMICAL, FOAM/CO2. USE
WATER TO KEEP FIRE-EXPOSED CONTAINERS COOL. USE SUPPLIED AIR
BREATHING EQUIPMENT FOR ENCLOSED/CONFINED AREAS.
Unusual Fire/Explosion Hazard:IF SPILL HAS NOT IGNITED, USE WATER SPRAY
TO DISPERSE VAPORS. DON'T PRESSURIZE/CUT/WELD/BRAZE/SOLDER OR
EXPOSE CONTAINERS TO IGNITION SOURCES, THEY MAY EXPLODE.

Spill Release Procedures:RECOVER FREE PRODUCT. ADD SAND, EARTH OR OTHER
SUITABLE ABSORBENT MATERIAL TO SPILL. OPEN ALL WINDOWS & DOORS.
AVOID BREATHING VAPORS. KEEP PRODUCT OUT OF SEWERS & WATERCOURSES
BY DIKING OR IMPOUNDING .

Handling and Storage Precautions:KEEP STORAGE CONTAINERS CLOSED WHEN
NOT IN USE. DON'T STORE NEAR HEAT/SPARKS/FLAME/STRONG OXIDANTS.
DON'T ATTEMPT TO REMOVE RESIDUE FROM CONTAINERS.
Other Precautions:EMPTY CONTAINERS RETAIN RESIDUE (LIQUID/VAPOR) & CAN
BE DANGEROUS. DON'T PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL,
GRIND, OR EXPOSE CONTAINERS TO SOURCES OF IGNITION. THEY MAY
EXPLODE & CAUSE INJUR Y/DEATH. AVOID SKIN & EYE CONTACT.

Respiratory Protection:NO SPECIAL REQUIREMENTS UNDER ORDINARY
CONDITIONS OF USE & W/ADEQUATE VENTILATION. USE AS NEEDED.
Ventilation:PROVIDE ADEQUATE VENTILATION TO KEEP Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SPLASH GOGGLES, FACE SHIELD
Other Protective Equipment:AS NEEDED
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. DISCARD OIL-SOAKED SHOES. WASH THOROUGHLY BEFORE BREAKS,
MEALS, ETC.
Supplemental Safety and Health
EMPTY DRUMS SHOULD BE COMPLETELY DRAINED, PROPERLY BUNGED & PROMPTLY
RETURNED TO A DRUM RECONDITIONER.

Vapor Pres:NEGLIGIBLE
Vapor Density:>AIR
Spec Gravity:0.8940-0.8899
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, DARK AMBER LIQUID W/MILD, BLAND PETROLEUM
ODOR
Percent Volatiles by Volume:NEGL

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:HEAT, OPEN FLAMES, SPARKS, PILOT LIGHTS,
STATIC ELECTRICITY, SOURCES OF IGNITION
Hazardous Decomposition Products:CO/UNIDENTIFIED ORGANIC CMPS/COMPLEX
MIX OF AIRBORNE SOLID/LIQUID/PARTICULATES/GASES/FUMES/SMOKE/SULFUR
OXIDE/ALDEHYDES

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. ADVISE AUTHORITIES IF THE PRODUCT HAS ENTERED
OR MAY ENTER SEWERS, WATERCOURSES, OR EXTENSIVE LAND AREAS. DON'T
PRESSURIZE CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.